2.3.3
Operating mode
Flush actuation takes place without contact via an infrared sensor on
the flush plate.
The flush volume can be set in four stages.
In order to actuate a flush, a person must be within the detection area of
the infrared sensor for at least 8 seconds.
If a person leaves the detection area, a flush is automatically actuated.
Depending on the setting, the flush duration is between 2 and 15 sec‐
onds.
A flush cycle can also be manually actuated by placing a hand briefly in
front of the sensor.
Infrared actuation
Product information
Urinal flush plate for Prevista Visign for More 200 infrared flush actuation
9 from 27
