Viega Megapress Скачать руководство пользователя страница 31

Страница: 31 / 32

Insert the press jaw (

≤

D 1) into the press machine and push the

retaining bolt in as far as it will go.

INFO! Observe the press tool instruction manual!

Open the press jaw and place at a right-angle onto the connector.

Check the insertion depth using the marking.

Ensure that the press jaw is placed centrally on the bead of the
press connector.

Carry out the pressing process.

Open and remove the press jaw.

Remove the checking strip.

The connection is marked as having been pressed.

Place the adapter jaw onto the press machine and push the
retaining bolt in until it clicks into place.

INFO! Observe the press tool instruction manual!

Position the press ring on the connector. The press ring must com-
pletely cover the outside ring of the press connector.

Position the adapter jaw into the seat of the press ring.

Check the insertion depth using the marking.

Ensure that the press ring is placed centrally on the bead of the
press connector.

Carry out the pressing process.

Open the adapter jaw and remove the press ring.

Pressing with press jaw at D

≤

Pressing with press rings with D

–2

Handling

Megapress

31 from 32

Содержание Megapress

































Результаты поиска

Содержание Megapress

Отзывы:

Похожие инструкции для Megapress

Бренды по названию

Популярные бренды

Viega Megapress, Инструкция по эксплуатации

Результаты поиска

Содержание Megapress

Отзывы:

Похожие инструкции для Megapress

Бренды по названию

Популярные бренды