Inlet capacity (at 0.25 MPa
(2.5 bar))
20 l/min
Diameter of bathtub drain hole
52 mm
DN (nominal diameter) drain sup-
port
40 / 50 mm
Length of Bowden cable
560 mm
Length
100–260 mm
Height
180–400 mm
Dimensions and installation depth
Water head seal
50 mm
2.3
Accessories
The accessories shown here are not included in the scope
of delivery. If required, it must be purchased separately.
pipe interrupter
To ensure that no bath water flows back into the drinking water system,
a pipe interrupter must be installed, e. g. the connection set with con-
cealed pipe interrupter DN 20 in acc. DIN EN 1717, model 6161.86.
Equipment sets
As this product is a the functional unit (without rotatable rosette and
valve cone), you require an equipment set to enable complete mounting.
Equipment sets contain a rotatable rosette for the overflow and a valve
cone for the drain of the functional unit. You can find a choice of dif-
ferent models in various designs in the catalogue.
Required accessories
Product information
Multiplex Trio drain/overflow functional unit
8 from 20
