Viega 6161.52 Скачать руководство пользователя

Страница: 17 / 20

Overflow and drain are connected.

The connection to the waste water system has been made.

Push union nut and clamping ring (parts of the connection set) onto
the water-carrying pipe.

Push the narrow end of the screw fitting (part of the connection set)
into the pipe as far as it will go.

Push the free end of the screw fitting into the inlet adapter.

Screw in the pipe tight with the union nut onto the inlet adapter.

Insert the inlet adapter into the overflow unit.

The inlet adapter must click into place in the overflow unit with a
noticeable clicking sound.

3.2.6

Mounting equipment set

The equipment set is not included in the scope of delivery

and must be purchased separately.

To avoid damage to the rosette and valve cone, only mount the equip-
ment set after finishing all other work on the building site. Proceed as
follows:

Place the flange cover onto the supply flange with the straight side
facing downwards and affix.

Align and fit rotatable rosette.

Fit valve cone.

Handling

Multiplex Trio drain/overflow functional unit

17 from 20

Содержание 6161.52





















Результаты поиска

Содержание 6161.52

Отзывы:

Похожие инструкции для 6161.52

Бренды по названию

Популярные бренды

Viega 6161.52, Инструкция по эксплуатации

Результаты поиска

Содержание 6161.52

Отзывы:

Похожие инструкции для 6161.52

Бренды по названию

Популярные бренды