3.1.2
Installation dimensions
Fig. 3: Dimensional drawing
The following values are valid for L (length) and H (height):
L = 100–260
H = 180–400
3.1.3
Required tools and materials
The following tools are required for mounting:
n
fine-toothed saw
n
mounting aid (included in the scope of delivery)
n
spanner (SW 26)
The following material must be purchased separately and must be avail-
able during mounting:
n
pipe interrupter (e. g. the pipe interrupter set for connection of the
inlet)
n
Connection set for the connection of the inlet (e. g. the pipe inter-
rupter set)
n
equipment set
3.2
Assembly
3.2.1
Mounting overflow
Proceed as follows to the mounting of the overflow:
Tool
Material
Handling
Multiplex Trio drain/overflow functional unit
12 from 20
