66251750-EN - V1.0 - 05/06/17
59
4000 Series Vandal Resistant Digital GSM Audio Intercom with Proximity
4000 Series Vandal Resistant Digital GSM - Technical Manual
Example 2:
To find the memory location of where the telephone number ending in
4567
is stored using the last 4 digits of the
number only, the following text can be sent to the digital GSM:
1111FDT”4567”?
Note that quotation marks
“
and commas
,
are used where appropriate. The optional
?
is included at the end so a
confirmation text is sent back to the sender. The digital GSM intercom will reply with the following text:
STORED IN nnnn
OK VIDEX GSM
where nnnn = the memory location between 0000 - 0499 of where the number is stored.
Example 3:
If the
FDT
search function is used to locate a telephone number that is not stored the digital GSM will reply with the
following text:
NOT FOUND
OK VIDEX GSM
FIND A FOB OR CARD (FDF)
The find a fob or card feature allows the user to search and find the fob/card memory location (between 0000 - 1999) of where a
proximity fob or card is stored in the digital GSM intercom. It locates the fob or card using the 5 digit user code printed on the fob
(see the following example). The following text message can be used.
1111FDF”nnnnn”?
Find the fob/card memory location for user code nnnnn, where nnnnn = user code (5
digit user code printed on fob/card).
Example:
Find fob/card memory location of card no.
12345
, the following text can be sent to the digital GSM intercom:
1111FDF”12345”?
Note that quotation marks
“
are used where appropriate. The optional
?
is included at the end so a confirmation text
is sent back to the sender. The digital GSM intercom will reply with the following text:
STORED IN nnnnn
OK
VIDEX GSM
where nnnnn = memory location of where the fob/card is stored.
DOOR OR GATE (GAT)
This command feature of the digital GSM allows the internal speech board to change the default speech annunciation that is heard
from the intercom when the onboard relay is activated. For this feature to be heard the internal speech board must be switched ON
(refer to notes on enabling/disabling the speech board,
SBM
, on pages 40 and 58).
By default the mode of this feature is set to ‘001’, whereby the internal speech board will announce
“the gate is open”
when the
onboard relay is activated. The alternative mode can be set to ‘000’, whereby the internal speech board will announce
“the door
is open”
. To set the required door/gate mode the following commands can be sent to the digital GSM intercom (also see notes on
page 41).
1111GATnnn
Set the speech board annunciation to mode nnn: 001 or 000 (001 = “the gate is open”, 000
= “the door is open”).
1111GATnnn?
Set the speech board annunciation to mode nnn: 001 or 000 (001 = “the gate is open”, 000
= “the door is open”) also send a confirmation text back to sender.
1111GAT?
Query the speech board annunciation mode set.
Programming via Text Message
