Videovox Pro SATA series, Руководство пользователя

Страница: 61 / 107

61
Figure 4-17
4.5.1 Hard Disk Management
Here is for you to view and implement hard disk management. See Figure 4-18.
You can set proper mode for each hard disk from the dropdown list.
When you use redundant backup function, you can set one or more redundant HDD(s).
Please note you need to set at least one read-write disk, otherwise system will not record
video. For detailed information you can refer to chapter 4.4 Schedule.
After all the setups please click save button, system needs to reboot to get all the
modification activated.
Figure 4-18
Click alarm set button, the interface is shown as below. See Figure 4-19.
Please highlight icon to select the corresponding function.
You can enable one or more alarm setups. The lower limit ranges from 1% to 99%. Alarm
channel number ranges from 1 to 6. Delay value is from 0 to 240 seconds.
Please note when HDD capacity is not full system only alarms once!
After all the setups please click OK button, system goes back to the previous menu