66
matrix output. All the operation below based on LBL series DVR.
You can set for each channel. The function consists of two types
.
Figure 4-29
4.5.8.6.1 Single Tour
Please enable tour function. Then set interval time and select corresponding cameras. You
can select “ALL” to tour between all channels. Please note only Group 1 supports “ ALL
“function.
Note:
z
”- -“means that there is no alarm activation tour.
z
If you have selected the “ALL” for the matrix output in Group 1, the matrix output will
tour only between all cameras and the other groups setting will be null.
4.5.8.6.2 Alarm Tour
Select the “alarm in” channel number from the dropdown list. If there is an alarm signal
from the channel selected, the matrix output will go to tour as you set in the “Alarm” setting
(Main Menu->Setting->Alarm). See Figure 4-30.
Alarm tour has higher priority than single tour during this period, the single tour will stop.
After alarm activation tour, the matrix output will continue single tour.
Figure 4-30
4.5.8.7 Examples
4.5.8.7.1 Example one
Содержание SATA series
Страница 1: ...1 SATA series Standalone DVR User s Manual...