Figure 7-26
In
545H
Figure 7-26 click alarm PTZ button, you can see the following interface.
See
546H
Figure 7-27.
Figure 7-27
6.6.67.6.6
Motion Detection
Motion detection will take effect exclude the time you set to schedule recording.
See
547H
Figure 7-28.
The blue area is the selected motion detection area.
Click
Full screen
or right click mouse to view the motion detection area in full screen.
After setting the area you can
Save channel
or
Clear
the area.
Alarm output
：
Here you can enable alarm output channel. Please draw a
√
before
the check box.
Please note if you want to set this channel as motion detection recording, you need
to turn off the schedule recording setup for this channel (Main Menu->Setting-
>Schedule).
Figure 7-28
There are three options:
preset, auto scan and tour.
