Videotec WASPT, Инструкция по эксплуатации

Страница: 12 / 134

EN - English - Instruction manual
10
MNVC
W
ASPT_2045_EN
DESCRIPTION OF CONTACTS
Contact
Description ULISSE ULISSE NE
TC
AM/ULISSE
RADIC
AL
ULISSE2 ULISSE C
OMP
AC
T
ULISSE C
OMP
AC
T
DEL
UX
ULISSE E
VO
NVX NXPTZ/NXPTZT NXPTZ DEL
UX/NXPTZ
SERIES2/NXPTZR SERIES2/NXPTZT SERIES2
L1 Level switch Do not use
L2
CP
Pump activation (dry contact) O1 O1 RL2A R2A R1A RL2A CONN 1,
(pin 1) Cable: Green-
Brown Cable: Green-
Brown
GCP GND pump activation (dry contact) C1 C1 RL2B R2B R1B RL2B CONN 1,
(pin 2) Cable: Green-
White Cable: Green-
White
CW Wiper activation (dry contact) Refer to chapter: 6.5.5 Wiper manual activation
GCW GND wiper activation (dry contact)
A1L Liquid level alarm output (dry contact) – Alarm x1 ALx1 – A AL1 – – Cable: Brown
A2L Liquid level alarm output (dry contact) – ALARMS COM – G COM – – Cable: Green
AVL Liquid level alarm output (controlled when
powered) ALx1 – – W – – – Cable: Black –
GND GND liquid level alarm output (controlled
when powered) COM/AGND – – G – – – Cable: Green –
RS485-A Connect the serial line RS-485-A (+) coming
from the control system Refer to chapter: 6.5.6 Remote control with DTWRX optional board
RS485-B Connect the serial line RS-485-B (-) coming
from the control system
1 Any one of the alarm inputs available.
Tab. 2