Videotec NXPTZ, Инструкция по эксплуатации

Страница: 68 / 414

EN - English - I
nstruc
tion manual
66 MNVCNXPTZT_1710_EN
11.7 Recalling the Home position
Using the control device it is possible to recall a
previously saved Home (Scan n.1) position (for further
information refer to the manual of the control device
in use).
11.8 Enabling the wiper (Wiper)
Do not use the wiper if the outside
temperature is below 0°C or in case of ice.
To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (11.13 Special controls, page 67).
If it is left on, the wiper automatically
disables itself.
11.9 Enabling the washer
(Washer)
When a control is provided, the Pan & Tilt is
positioned with the window in front of the nozzle..
The pump and wiper are activated for a set period of
time. At the end of the operation the P&T returns to
its initial position.
To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (11.13 Special controls, page 67).
11.10 Unit Reboot
For further information refer to the relative chapter (
11.13 Special controls, page 67).
11.11 Manual correction of a
preset focusing
Load the preset whose focus needs to be changed
using the Scan command. Change the focus using
the appropriate keys Focus Far/Focus Near without
changing the Pan/Tilt/Zoom position. Save the preset
using the appropriate Preset command.
The manual correction of the Preset works
only if the Daytime/Nigh-time Autofocus
fields are disabled (9.1.6.5 Preset Menu
(Utilities Preset), page 41).
11.12 Web interface
For further information refer to the relative
chapter (9.3 Web interface, page 56 66).