Videotec NXPTZ, Инструкция по эксплуатации

Страница: 46 / 414

EN - English - I
nstruc
tion manual
44 MNVCNXPTZT_1710_EN
9.1.8 Options Menu
1.
Ceiling Mount:
When this mode is enabled the
image and the movements controls are turned
upsidedown.
2. Alarms: Allows access to the Alarms menu.
3.
Washer:
Allows access to the Washer menu.
OPTION
------------------------
1>CEILING MOUNT :N
2 ALARMS >
3 WASHER >
Fig. 72
9.1.8.1 Alarms Menu
1-5. Alarms 1-5: Allow access to the menus from
which it is possible to set the parameters of
Alarms 1 to 5.
6.
Alarms State:
Allows access to the Alarms State
menu.
ALARM
------------------------
1>ALARM 1 >
2 ALARM 2 >
3 ALARM 3 >
4 ALARM 4 >
5 ALARME 5 >
6 ALARMS STATE >
Fig. 73
From the Alarms menu it is possible to access one of
the menus (Alarms 1-5) to edit the alarms parameters.
1.
Type:
Set the type of contact: normally closed
(N.C.) or normally open (N.O.).
2.
Action:
The type of action carried out by the
unit when the alarm triggers (Autopan, Patrol,
Relay 1, Relay 2, Scan, Tour 1, Tour 2, Tour 3,
Washer, Wiper). If Off is selected, the alarm is
disabled.
3. Number: The preset to be reached when the
alarm’s type of action is Scan.
4. Text: It is possible to set the wording displayed
when the alarm is enabled.
ALARM 1
------------------------
1>TYPE :N.C.
2 ACT. :SCAN
3 NR. : 1
4 TEXT :ALARM 1
Fig. 74
This is a dynamic self-configuration menu based on
the choice made and shows the parameters on which
it is possible to operate.
From the Alarms menu it is possible to access the
Alarms State menu where the state of alarms inputs
is displayed (CLOSED, contact closed, OPEN, contact
open).
ALARMS STATE
------------------------
ALARM 1 CLOSED
ALARM 2 OPEN
ALLARME 3 CLOSED
ALLARME 4 CLOSED
ALLARME 5 CLOSED
Fig. 75