Videotec EXHC series, Инструкция по эксплуатации

Страница: 14 / 112

EN - English - I
nstruc
tions manual
12
8.2 Spare parts
j
To order the spare parts it is necessary to
provide the serial number of the product on
which the intervention is to be carried out.
8.3 Repairs
j
For any other maintenance intervention the
product must be sent to VIDEOTEC, subject
to a request for return authorisation
(techsupport@videotec.com).
9 Disposal of waste
materials
The European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE) mandates
that these devices should not be disposed of in the
normal flow of municipal solid waste, but they should
be collected separately in order to optimize the
recovery stream and recycling of the materials that
they contain and to reduce the impact on human
health and the environment due to the presence of
potentially hazardous substances.
n
The symbol of the crossed out bin is marked
on all products to remember this.
The waste may be delivered to appropriate collection
centers, or may be delivered free of charge to the
distributor where you purchased the equipment at
the time of purchase of a new equivalent or without
obligation to a new purchase for equipment with size
smaller than 25cm.
For more information on proper disposal of these
devices, you can contact the responsible public
service.
• Opening the housing to change the camera :
Check the condition of the back cover gasket of
the housing; if it needs changing use only the one
supplied with the housing or, failing that, use only
VIDEOTEC original spare parts ( "6.2.2 Changing the
back cover gasket", page 10 ).
8.1.2 Extraordinary (to be done only
under particular circumstances)
• Changing the front unit with glass (or the glass
protection unit when present).
• Changing the inner slide unit with heater wiring
and electrical connection board, using the
appropriate spare part for versions with or without
the glass protection device.
• Hazardous wear or damage to cables.
• Camera or lens failure.
• Explosion in or near the housing.
• Any other situation in which the housing has to be
opened.
h
For damage to any parts that are not
indicated above, repair or replacement
must be done by VIDEOTEC.
h
Whenever replacing the parts as indicated,
always use VIDEOTEC original spare parts
and meticulously follow the maintenance
instructions supplied with every spare parts
kit.
h
The manufacturer declines all liability for
damage to any of the apparatus mentioned
in this handbook, when resulting from
tampering, use of non-original spare parts,
and from installation and maintenance/
repairs performed by non-authorised, non-
skilled personnel.
j
In all such circumstances, the housing
should be sent to the workshop for the
necessary repairs or maintenance.