Videotec DCJ, Руководство по эксплуатации

Страница: 163 / 256

Page 33
MNVADCJ01_1729
_EN
5.5 Switchers SM42A and SM82A
5.5.1 Description
Switchers SM42A and SM82A are products dedicated to the management of video signals. The SM42A and
SM82A models differ only in the number of possible video input connections, 4 and 8 respectively; there are two
video outputs, one of which can be managed directly by a VCR.
As well as the usual switching, alarm management and on screen menu programming operations, the SM42A /
SM82A switcher is equipped with an optional auxiliary line that can be used to control the telemetry or
multiplexer units. Refer to the switcher manual for further information on this subject.
5.5.2 Connection
5.5.2.1 Cable
The communication cable is standard, as described in
§ 3.3 - Standard connection cable, page 12.
5.5.2.2 Switcher settings
The new generation switcher SM42A / SM82A can be controlled by different types of keyboard and therefore
emulates the respective protocols: to control the switcher with the DCJ keyboard the MACRO protocol with baud
rate 38400 should be used.
Set the dip switches in the switcher as required (all dips are OFF, with the exception of Macro Protocol, baud
rate 38400, programming).
5.5.2.3 Keyboard settings
While the keyboard is being set up, the

submenu should be set as follows:




Control of a SM42A switcher






Control of a SM82A switcher

The presence of two keyboards connected to the switcher means it is necessary to define two different
identification numbers (from 1 to 4).
5.5.2.4 Operational test
If the keyboard is connected directly with the switcher set up in this way using the telephone cable supplied, it
should be possible to switch the input videos immediately:

press

to select monitor 1

press

,

, to select the cameras.
5.5.3 Video device setup
The setup procedure is described in the video device’s instruction manual.
Press

to enter setup, and insert setup password if it has been enabled.