Videotec DCJ, Руководство по эксплуатации

Страница: 234 / 256

Page 104 MNVADCJ01_
1729
_EN
6.16.3.1 OSM Setup
Connect the dome directly to the keyboard and connect a monitor to the dome video outlet.
The DCJ keyboard enters special mode while the dome is being set up.

starts dome setup.
The dome shows the menu on video; the keyboard shows the mode change on the display:





setup end
Joystick

: movement within the menus
Zoom

, Focus

/

, Iris

/

when present

: enter submenus

: ‘5’ key when necessary, as specified in the dome manual
6.16.4 Autopan

: start autopan

: stop autopan
6.16.5 Preset, scan, home, patrol
Warning! The ‘Scan’ and ‘Patrol’ instructions given in the dome manual do not correspond to commonly
accepted use in this manual: for practical purposes the functions take on the ‘standard’ meaning and not that
suggested by the dome manual:

‘preset’ (associated with the

key) means storage of the present position

‘scan’ (associated with the

key) means the pan & tilt movement towards a previously stored position;
in the dome manual this function is called ‘preset’

‘patrol’ (associated with the

key) means a series of scans, where the previously stored positions are
shown one after the other in sequence; in the dome manual this function is called ‘scan’.
The storage of the preset position is different for each dome model:

SCC-641P: only from On Screen Menu

SCC-643P: from On Screen Menu or from keyboard through direct control keys.

(0÷127): movement towards previously stored preset position X

(0÷127): storage of the preset position X (only for the model SCC-643P)

: movement towards the Home position, corresponding to preset position 1

: start patrol

: stop patrol