17
E
N
G
L
I
S
H
D
E
U
T
S
C
H
F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L
I
T
A
L
I
A
N
8.The Screen Adjustment
INPUT
The OSD adjusting menu:
This function is to select the applicable input source, analog input (D-sub), or
Digital input (DVI-D).
H-POSITION
：
H-Position is used to adjust the horizontal image
position manually. A slider with current value is displayed.
INFORMATION
The “INFORMATION” menu provides the user with detailed information
regarding the current input format and version (include resolution, pixel clock,
vertical /horizontal frequency, software version, and input source).
V-POSITION
：
V-Position is used to adjust the
vertical image position manually. A slider with current
value is displayed.
RECALL
Recall is used to reload all factory default parameters, if the display is
operating in a factory Preset Timing Mode listed in this user manual.
CLOCK
：
The item ‘CLOCK’ is used to adjust the number of
clocks(pixels) per line (sample per line). A slider with current value is
displayed.
Audio Adjust
Volume
increases the volume, decreases the volume, and mutes the audio.
PHASE
：
The item ‘PHASE’ is used to adjust the ADC sample pixel
clock. A slider with current value is displayed. The range of phase adjustment
value is 0 to 100 for 0 to 360 degrees.
Balance
adjusts the proportion of sound coming from each speaker.
Bass
adjusts the low (bass) frequency audio output.
Treble
adjusts the high (treble) frequency audio output.
Mute
temporarily silences audio output.
AUTO CONFIG
(D-SUB input source only)
There are five items
：
AUTO ADJUST, ATUO TRACKING, AUTO POSITION,
AUTO COLOR
and
RETURN
.
Use the Adjust [
3
] and [
4
] key to scroll up
and down in menu, and then press the SELECT key to start this function. If
the MENU key is pressed, the main menu is re-displayed and nothing is
changed.
•
COLOR
Configure the image color. There are three item : 9300K
、
6500K
、
USER MODE.
9300K :
The item “9300K” is used to default 9300K color temperature.
AUTO ADJUST
：
Used to perform automatic configuration of the phase
、
clock
、
vertical and horizontal position.
6500K :
The item “6500K” is used to default 6500K color temperature.
AUTO TRACKING
：
It is used to tune the clock & phase to the best condition
automatically.
USER MODE:
RED
：
The item “RED” is used to adjust the gain of red channel in ADC.
GREEN
：
The item “GREEN” is used to adjust the gain of green
AUTO POSITION
：
It is used to center the image automatically. Both horizontal
and vertical position is adjusted such that the image is centered on the
panel.
channel in ADC.
BLUE
：
The item “BLUE” is used to adjust the gain of blue channel in ADC.
AUTO COLOR
：
It is used to adjust the gain and offset of the Red, Green and
Blue channels on the ADC automatically.
RETURN
：
Go back to main menu.
16
