25
E
N
G
L
I
S
H
D
E
U
T
S
C
H
F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L
I
T
A
L
I
A
N
DECLARATION OF CONFORMITY
11-2 Compliance Information for U.S.A.
Importer's Name:
INGRAM MICRO EUROPE AG
Importer's Address: Heisenbergbogen 3
The equipment has been tested and found to comply with the limits for a
D-85609 Dornach/Aschheim
Class B digital device, pursuant to part 15 of the FCC Rules, These limits
Germany
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
Declares, that the products
radio frequency energy, and if not installed and used in accordance with the
Product Name: 19-inch color monitor
instructions, may cause harmful interference to radio communications.
Model Number: V7 L19 Series
However, there is no guarantee that interference will not occur in a
Part Number : V7 P19S
Particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
Confirm to the following product specifications:
equipment off and on, the user is encouraged to try to correct the
Safety: IEC950: 1991+A1, A2, A3,A4,A11/EN60950: 1992+A1, A2
interference by one or more of the following measures:
A3,A4+A11
EMC : EN55022: 1998 -Class B
•
Reorient or relocate the receiving antenna.
EN50082-1: 1992 -General immunity
•
Increase the separation between the equipment and receiver.
EN61000-3-2: 1995/A1/A2:1998
•
Connect the equipment into an outlet on a circuit different from that to
EN61000-3-3: 1995
which the receiver is connected.
FCC title 47 CFR, Part 15 Class B / ICES-003 Issue 2
•
Consult the dealer or an experienced radio/TV technician for help.
Supplementary information:
The products herewith comply with the requirements of the following Directive
and carry the CE marking accordingly:
FCC Warning
To assure continued FCC compliance, the user must use ground power
- The EMC Directive 89/336/EEC (including 93/68/EEC)
supply cord and the provided shielded video interface cable with bonded
- The low voltage Directive 73/23/EEC (including 93/68/EEC)
ferrite cores. If a BNC cable is going to be used, use only a shielded BNC(5)
cable. Also, any unauthorized changes or modifications not expressly
These Devices comply with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) the devices may not cause harmful interference
and (2) the devices must accept any interference received, including
interference that may cause undesired operation.
approved by the party responsible for compliance could void the user’s
authority to operate this device.
11-3 CE Conformity for Europe
The device complies with the requirements of the
ECC directive 89/336/EEC as amended by
92/31/EEC and 93/68/EEC Art.5 with regard to
“Electromagnetic compatibility”, and 73/23/EEC as
amended by 93/68/EEC Art.13 with regard to
“Safety”.
Ingram Micro Europe AG
For Regulatory compliance information only, contact:
INGRAM MICRO EUROPE AG
Heisenbergbogen 3
D-85609 Dornach/Aschheim
Germany
24
