Doc # INS-24RS2.0SW-EXSDI
Issue Date: 11/27/2017
Revision: A
Page 18 of 19
6.
Specifications
Electrical
24RS2.0XW-EXSDI
Image Sensor
2MP 1/2.8” STARVIS IMX291 sensor
Effective Pixels
1920 x 1080
Scan Frequency
25 / 30hz / Progressive
Video Format
HD 16:9, CVBS 16:9
Video Output
EX-SDI (1.0, 2.0)
HD-SDI
CVBS 1Vp-p ± 10%, 75Ω
Synchronization
Internal
Video Resolution
1920x1080 (30/25fps@2MP)
720p (30/25fps) and 720p cropped (60/50fps)
Min. Illumination
Color: 0.08 LUX, B/W: 0.005 LUX @50 IRE
Color: 0.005 LUX, B/W: 0.0001 LUX in “Sens-up”
Signal to Noise Ratio
>50dB (AGC off)
Exposure
Brightness / Shutter / Sens-up / AGC
White Balance
AUTO / AUTOext / PRESET (push to set) /
MANUAL
WDR*
WDR
>100dB
True Wide Dynamic Range by dual scan images in two frames at 30fps/
25fps
ROI-WDR
Region of Interest Wide Dynamic Range (YES)
DNR (Digital Noise Reduction)
YES
Mirror / Flip
Off / On
Operating Power
12VDC +/- 0.5V, polarity protected
Power Consumption
<1.3W
Parameter Controls (OSD)
Functions
NTSC/PAL, ACE (D-WDR), Motion Detection, Privacy Mask, Defog,
Sens-up (x32), Sharpness, Mirror/Flip, BLC/HLC, Deblur, Anti-
Saturation, Color Bar, Title Set, Smart IR, Day/Night settings
Environmental
Operating Temp.
-10°C - 50°C (14°F - 122°F)
Operating Humidity
20% - 80%RH
OSD Control Board (Optional to connect to connector#2)
60ZRC08
control board
Cables
60C1026-1 Included
6”, 3pin molex to flying leads. Power/CVBS only
60C1200 Optional
Power/CVBS/HD-SDI cable all in one with breakout to
SDI and
connecter 1 and 2
60C1204 Optional
MMCX Plug to bulkhead type BNC HD-SDI and EX-SDI
*EX-SDI/ HD-SDI only