Doc # INS-24RS2.0SW-EXSDI
Issue Date: 11/27/2017
Revision: A
Page 15 of 19
5.8.7.7.
CR LEVEL
Adjusts the mask color by CR LEVEL. (0: Green ~20: magenta)
5.8.7.8.
TRANS.
Selects transparency rate for the mask area from 0 to 3
0: Privacy mask is not transparent.
1: Privacy mask is 25% transparent.
2: Privacy mask is 50% transparent.
3: Privacy mask is 100% transparent.
5.9.
MOTION
4 motion detection areas are available and each area is programmable in size and location. When
motion is detected the results are displayed in blocks and/or a text message.
5.9.1.
DET WINDOW
Sets the MOTION DETECTION areas on screen.
5.9.1.1.
WINDOW ZONE
Set the detection zone number from 0 to 3.
5.9.1.2.
WINDOW USE
Sets ON/OFF motion detection area of the selected zone.
If set to ON, the horizontal/vertical position and size can be adjusted.
5.9.1.3.
DET H-POS, V-POS
Adjusts the detection area H, V position of the selected zone.
5.9.1.4.
DET H-SIZE, V-SIZE
Adjusts the area size using H, V direction of the selected zone.
5.9.2.
DET TONE
Sets the detection zone 0 to 4.
0: Set the 100% opacity level of video background except detection window zone.
1: Set the 50% opacity level of video background except detection window zone.
2: Set the 25% opacity level of video background except detection window zone.
3: Video background image is same as detection window zone.
4: Detection window zone is displayed with box line
5.9.3.
MDRECT FILL
Sets the motion display on when motion is detected on video. Setting ON is displayed red solid
box type. Setting OFF is displayed red outline box type.
