Doc # APN-24M8.29IP
Issue Date: 03/23/2020
Revision: C
Page 44 of 71
Interval: Enter the E-mail sending time interval
after the event occurred.
Aggregate events: Enter the number of events for E-mail sending. If the number of events has reached
the setting value, E-mail
will be sent.
Use mail server: Click the Use mail server checkbox and provide the following information for E-mail
server.
Mail Server: Enter the host names or IP addresses for your mail servers in the fields provided.
NOTE
If a host name is used, a valid DNS server must be specified in the Network-Basic settings.
Port: Enter the SMTP server port number for the SMTP Server. The Port number can be adjusted in the
range 1-65535. The default setting is 25.
NOTES
•
If your mail server requires authentication, click the Use (SMTP) authentication checkbox to log in
to this server.
•
Please consult with your network administrator, if you want to change the port number.
Enable use (SMTP) authentication: If your mail server requires authentication, click the Use (SMTP)
authentication checkbox to log in to this server.
Username: Enter the Username as provided by your network administrator.
Password: Enter the Password as provided by your network administrator.
Login method: Select one for SMTP authentication method allowed.
NOTES
•
If a PLAIN or LOGIN mechanism is negotiated, the camera sends username and password to the
SMTP server.
•
The LOGIN mechanism is supported by Microsoft, as well as by some other clients. Most other
clients support the PLAIN authentication mechanism.
•
Since most Email clients support only PLAIN or LOGIN, mail server administrators will probably
want to consider using STARTTLS to provide an encryption "tunnel" between the client and server,
to protect the username and password.
Receiver List: Enter the recipient’s E-mail address as the receivers.
Receiver 1~8: Enter the recipient’s E-mail address as the receiver to test.
Email (SMTP) Test: Enter the recipient's E-mail address and click the Test button to test that the mail
action is functioning and that the E-mail address is valid. When the setup is complete, the connection
can
be tested by
clicking the Test button.
Receiver: Enter the recipient’s E-mail address as the receiver to test.
CONFIDENTIAL
