Doc # APN-24M8.29IP
Issue Date: 03/23/2020
Revision: C
Page 14 of 71
9.
Accessing the IP camera
On the assumption that User PC and the camera are used under static IP, and the camera is to
be directly connected with User PC or Local Network, the installation procedure is to be;
1.
Connect the camera and PC with LAN cable (Direct cable or cross cable).
(Please use direct cable if you connect to a local network)
2.
Power on camera.
*
Using regulated 12V DC 500mA (No IR LED model) or 1A (Built-in IR LED model)
*
Using PoE (Power Over Ethernet): This camera utilizes PoE that supplies power in addition
to data sending and receiving using LAN cable without need for a separate power connection
It is convenient for installation purposes. IF you connect the camera with PoE and DC
adaptor, only PoE is used.
3.
Wait about 2 minutes after plugging in camera for the system to boot.
4.
Open Web browser
5.
Type IP address
Enter the camera’s IP address in the
Internet Explorer
®
address bar.
The default IP address is: 192.168.0.10
The default User ID and Password is:
User ID:
admin
Password: admin1357
CONFIDENTIAL
