14
5.0
Quick Connect Guide
1. First connect the 50’ plenum rated, Category 5, RJ-45 plug to RJ-45 plug cable
between the RJ-45 jack labeled MAIN on the back of the camera module enclosure
and the RJ-45 jack on the back of the provided wall plate.
2. Connect the provided 12VDC power supply to the jack on the front of the plate
labeled 12 V DC and plug the power supply into a standard 110V-120V electrical
outlet. Use only the provided 12VDC power supply.
3. Connect the
Output
jacks labeled S-VIDEO or COMPOSITE to the
Inputs
of video
devices such as video conferencing systems, monitor/receivers, VCRs, LCD and
DLP projectors, video switchers, video capture cards, video to USB adapters etc..
Note: Both S-VIDEO and COMPOSITE outputs are live.
4. Put Batteries in the IR Remote Control and turn the camera ON.
5. Use the IR Remote Control to zoom in & out on the document/object positioned
under the Ceiling DocCam.
12 V DC
Power
Supply
Suspended Ceiling
S-Video
Comp.
Video
Table or Work Surface Directly
Under Ceiling DocCam
Ceiling DocCam
Camera Module
Enclosure, Tile
Support Rails and
Trim Ring
50’ Plenum Rated, Category 5, RJ-45 plug to
RJ-45 Plug Cable. Attach between MAIN
RJ-45 Jack on Camera Enclosure and RJ-45
Jack on the Rear of the Wall Plate.
Example:
Video
Monitor
Example: Video
Conferencing System
Power and
Video Wall
Plate
RJ-45
RJ-45
