7
1.3
Cable Connections
The camera module enclosure and 50’ connection cable are plenum rated for
use inside plenum return air spaces. The connectors on the back of the camera
module enclosure are labeled MAIN and RS-232. The enclosure is also
equipped with threaded inserts positioned to enable attachment to a standard
electrical box (not provided) and with standard conduit connectors (Figure 8).
Figure 8: Rear of Camera Module Enclosure
MAIN
RS-232 Threaded Inserts
The MAIN connector carries S-video (S-VHS), composite video and power from
the rear of the camera module enclosure to the rear of the wall plate with the
provided 50’ Category 5 plenum rated RJ-45 to RJ-45 cable (Figure 9). The RS-
232 connector is provided for use with control systems such as Crestron and AMX
(the RS-232 cable is not provided).
Figure 9: Rear of Enclosure and Plate Connected with 50’ Cable
The front of the wall plate provides the break-out connections for power, S-video
and composite video. The wall plate may be attached to a standard single gang
