6
INSTALLATION MANUAL
1. XTO-IP PANEL SETUP
XTO-IP
Alarm panel
1.5 Cover locking
Place and screw the cover on
its support.
•
Press the XTO programming button and release for the enrollment of a programming
keypad.
• Insert
all
LS14500 Lithium batteries
into the keypad.
•
Do not mount the keypad.
It will display one of the following screens:
1.4 Pairing the remote keypad
RSI (c) 2013
YLGHR¿HGFRP
<=========XX=========>
or
•
Press on both
CLR
and
ESC NO
keys at the same time
and release. The indicator
LED on the keypad will blink rapidly. Wait for the keypad to pair.
•
If the keypad doesn’t pair up with the panel
and shows «XX», it certainly means
that it is still paired to another system and needs to be reset. Take the batteries out,
and press repeatedly on the keypad tamper switch. Then proceed to the above
steps.
Screw locking
