15
.
XTender Mode
In XTender Mode, control panel will only arm/
disarm by latching 9-12V to one of the two
inputs.
Arming input 1:
Arming/disarming Area 1 & 2.
Entry delay on Area 1.
Arming input 2:
Arming/disarming Area 3 & 4.
Entry delay on Area 3.
Choose an arming mode.
Slow:
Follows the arming/disarming of host.
This will arm each device one at a time to
conserve battery.
Fast:
Instant arm all devices. Sacrifices battery
life.
Enter a value for Entry Delay and press the YES
key. (Max: 255 seconds)
*No Exit Delay when using XTender Mode.
Enter the amount of time any event will be
delayed before transmission and press the YES
key.
(Max: 600 seconds)
For ‘ARMING CONFIRMATION’, select the amount
of time of latched voltage the panel requires
before arming and press the YES key. (0-5
seconds)
Содержание XT200i
Страница 5: ......
