Videofied XT series, Руководство пользователя

Страница: 8 / 58

1. From your keypad
 Press the key on the keypad to wake it up
 Enter your access code and press or to confi rm
 The keypad display will then show the following message
 The time delay starts, and short beeping sounds are emitted from the keypad
and/or remote internal sirens. At the end of the time delay the system is set.
The red light on the keypad fl ashes every two seconds.
2. From your remote control
 Press the button and release after the fi rst beep
 The remote control will then beep twice in confi rmation

The time delay starts, and short beeping sounds are emitted from the keypad
and/or remote internal sirens. At the end of the time delay the system is set.
The red light on the keypad fl ashes every two seconds.
Settingyoursystem
Partsettingyoursystem
SYSTEM
ARMING
1. From your keypad

Press the button on the keypad then press the button
 Wait for the keypad display
 Enter your access code and press or to confi rm
 The keypad display will then show the following message
 The time delay starts, and short beeping sounds are emitted from the keypad and/or remote
internal sirens. At the end of the time delay the system enters part set mode 1.
The red light on the keypad fl ashes every two seconds.
2. From your remote control
 Briefl y press the or button and release after the fi rst beep
 The remote control will then beep twice in confi rmation
 The time delay starts, and short beeping sounds are emitted from the keypad and/or
remote internal sirens. At the end of the time delay the system enters part set
mode 1 or 2 depending on which button was pressed. The red light on the keypad
fl ashes every two seconds.
2
ALARM MODE SP1
> BADGE OR CODE
ARMING
SP1
ENGLISH
6
Notice_2012_int.indd 6 08/11/12 16:12