Videofied XT series, Руководство пользователя

Страница: 10 / 58

Unsettingafteranalarm(alarmmemo)

If an alarm has activated, during the unsetting of your system the screen
of the keypad provides you with details of what caused the alarm
 Press the button to check the alarm memo and the keypad then gives details
of the cause of the alarm (displayed for 5 seconds)
 Then the keypad goes into standby mode after 40 seconds
2. Add a new access code
 Press several times until the following screen menu appears
 Confi rm with button

Enter an existing level 3 code (master code) and confi rm with
 To record a new code press once again

Enter the code (4 to 6 digits) followed by , confi rm this code followed by
 Enter the name associated with this code (SMS type data entry),
for example: HELENA, confi rm by
NOTE: Creation of a code generates 2 sub-codes:
Code + 1: code which allows shutdown of the system while generating a silent alarm
Code + 2: code which allows shutdown of the system while generating an audible alarm
Example: Code 1999 will give respectively
2000 (silent alarm) and 2001 (audible alarm)
Programmingyoursystem
From your keypad
1. Accessing programming mode
 To access the various menus press the arrow keys or
on the keypad
You need to go to level 3 to access management of the access codes
 From the main menu:
 Press
 Change the level by pressing twice on
 Confi rm by pressing

Enter the level 3 code then press to confi rm
 Return to the main menu by pressing once on
INTRUSION
DETECTED
AREA N°
DETECTOR NAME
BADGES/
ACCESS CODES
ACCESS LEVEL
1
ACCESS LEVEL
LEVEL: 1
ACCESS LEVEL
LEVEL: 3
ACCESS LEVEL
LEVEL: 3
BADGE OR CODE?
8
Notice_2012_int.indd 8 08/11/12 16:12