background image

12

www.videofied.com

INSTALL SHEET

OMV

 OUTDOOR MOTION VIEWER

EMEA SALES

23, avenue du Général Leclerc
92340 BOURG-LA-REINE
FRANCE
E-Mail : [email protected]

North American Headquarters

1375 Willow Lake Blvd, Suite 103
Vadnais Heights, MN 55110
USA
E-Mail : [email protected]

The EC declaration of conformity of 
this product is available by flashing 
that QR code :

STANDARDS AND CERTIFICATIONS

868MHz (OMV 210)

Compliant with the annex IV of the R&TTE Directive 1999/5/EC

NF EN50131-2-2

2008 Grade 2

915MHz (OMV 611)

USA FCC

Part 15C

Canada IC

RSS-210 Issue 8

920MHz (OMV 712)

Australia C-Tick

AS/NZS4268

This symbol on the product or on its packaging indicates that this product should not be treated as household 
waste. It must be handed over to the applicable collection point for the recycling of electrical and electronic 
equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative 
consequences for the environment and human health. The recycling of materials will help to conserve natural 
resources.
For more information about recycling of this product, please contact your local municipality, your waste 
disposal service or the company that installed the product.

Matériels de sécurité électroniques, détection d’intrusion

DETECTEUR DE MOUVEMENT A INFRAROUGE PASSIF

Marque commerciale

Videofied

Référence produits

OMV210

N° de certification

Organisme certificateur :
CNPP Cert. 

Route de La Chapelle Réanville 
CS22265 F-27950 SAINT MARCEL
Tel : +33(0)2.32.53.63.63
Fax: +33(0)2.32.53.64.46
Site Internet : 

www.cnpp.com

E-mail : 

[email protected]

Organisme certificateur :
AFNOR Certification

11, rue François de Pressensé
93571 Saint Denis La Plaine Cedex
Tel : +33(0)1.41.62.80.00
Fax: +33(0)1.49.17.90.00
Site Internet : www.marque-nf.com
E-mail : [email protected]

Содержание OMV 210













Отзывы: