I N S T A L L A T I O N S H E E T
2
BR250/651/752 Badge Reader
www.videofied.com
During arming
The arming stops.
The two indicators flash
green for 5s then turn off: A
fault was detected.
In order to know more
about what happened a
keypad is required.
Without action from the
user, arming will start
again after 3 min and the
concerned detector will be
bypassed from this arming.
Flashing of the top red
indicator (only) every
second during arming
delay.
The top red indicator
flashes every two
seconds indicating that
the system is armed.
Everything is fine :
System is arming
Problem was
identified during
the incomplete
arming (detection
in and instant area)
The LEDs will stay
on for 5 seconds
The two indicators turn off, the system is
disarmed.
There was no alarm
An alarm
triggered on
The top indicator
flashes green for
2s, and that of the
bottom flashes
fixed green light
and the reader
beeps 4 times
The two indicators
remain on with
fixed green light
for 5 seconds
When reading the badge, the reader emits a beep, then two
beeps indicating the badge has been accepted. The LED
indicators of the reader are going to indicate a message:
When reading the badge, the reader emits a beep, then two
beeps indicating the badge has been accepted. The LED
indicators of the reader are going to indicate a message:
Functioning of indicators
During disarming
Verify with a keypad
in order to know more
about what happened