Videk VISIONSENSOR 2030 Скачать руководство пользователя страница 54

Страница: 54 / 98

K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 -

Save Settings

5.4 - VGA & Megapixel Settings

User’s may optimize the VS 2030’s megapixel (SXGA) imager (1280 x 1024) to VGA (640 x 480). This

feature is used to decrease the pixel sampling area, which will greatly increase processing speed. This is

an advanced feature used for the rapid decoding of 1-dimensional/linear codes and larger module size 2-

dimensional codes. Videk recommends testing this feature, as it will not work well with many high density
codes.

Enable VGA - 640 x 480

Enable SXGA - 1024 x 1280

Enable DOT (Default)

5.5 - Mirror Decoding

Scan the following codes to enable/disable the mirroring feature:

Off (Default)

Note:

The Mirroring feature allows the VS 2030 to read codes as they are seen through a mirror (in-

versed 180°). If the Mirroring feature is enabled, all other code reading ability will be disabled.

Содержание VISIONSENSOR 2030



































































































Результаты поиска

Содержание VISIONSENSOR 2030

Отзывы:

Похожие инструкции для VISIONSENSOR 2030

Бренды по названию

Популярные бренды

Videk VISIONSENSOR 2030, Руководство пользователя

Результаты поиска

Содержание VISIONSENSOR 2030

Отзывы:

Похожие инструкции для VISIONSENSOR 2030

Бренды по названию

Популярные бренды