K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 -
56
Save Settings
7.6 - VS 2030 Maintenance
The VS 2030 device operates efficiently and reliably and needs only a minimum of maintenance to operate.
A few tips are given below for maintenance suggestions.
Cleaning the VS 2030 Window
The VS 2030 window should be clean to allow the best performance of the device. The window is the clear
plastic piece inside the head of the reader. Do not touch the window. Your VS 2030 uses CMOS technol
-
ogy that is much like a digital camera. A dirty window may stop the VS 2030 from reading codes.
If the window becomes dirty, clean it with a soft, non-abrasive cloth or a facial tissue (no lotions or additives)
that has been moistened with water. A mild detergent may be used to clean the window, but the window
should be wiped with a water moistened cloth or tissue after using the detergent.
The VS 2030 display screen and housing may be cleaned in the same way.
For applications that require cleaning with disinfectant, please use products with the following ingredients:
1) Isopropyl Alcohol
2) Ethyl Alcohol (Denatured Grade)
Videk does not recommend using bleach.
Technical Support and Returns
For returns or technical support call Videk Technical Support at (800) 292-6210 or (800) 24-VIDEK. For
all returns Videk will issue an RMA number which must be placed on the packing slip when the reader is
returned.