7
EN
NL
F
R
DE
ES
SE
Pin
DIN
Name
Color
Cable size
mm
2
AWG
1
L
Left Turn Signal
Yellow
1.5
15
2
Rear fog lamps
Blue
1.5
15
3
31
Ground(-) for pin 1 - 8
White
2.5
13
4
R
Right Turn Signal
Green
1.5
15
5
58R
Tail, side, registration
Brown
1.5
15
6
54
Stop lamps
Red
1.5
15
7
58L
Tail, side, registration
Black
1.5
15
8
Reversing lamps
Pink
1.5
15
9
30
+12V permanent
Orange
2.5
13
10
15
+12V via ignition lock
Grey
2.5
13
11
31
Ground (-) for pin 10
Black/
2.5
13
12
Trailer present
Light
1.5
15
13
31
Ground (-) for pin 9
Red/W
2.5
13
Pins 9 or 10 with their respective Ground returns (11 or 13) can
be used.
Normally, pins 9 and 10 are fused at 20 A in the car’s fuse panel.
The advantage of using pin 10 is that the PPP only charges when
the ignition is on, so the car’s battery doesn’t drain when parking.
Pin 10 is a non-standard option on most car models, so please
verify it’s available.
If connected to pin 9 be careful not to drain the car battery when
the engine is not running. Disconnect the trailer plug on longer
stops.
Most absorption type refrigerators use up to 10 A. When the PPP
is added on the same circuit, the 20 A fuse is not overloaded but
there is no available power for other loads. When other loads are
used, such as the water pump or lamps, the refrigerator must be
switched to gas power.
