Victron energy Phoenix Inverter 24/3000, Руководство пользователя

Страница: 17 / 144

15
EN
NL
F
R
DE
ES
SE
A
p
p
e
n
d
ix
Setting ds2 and ds1 for stand-alone operation
DS-8 not used Set off off
DS-7 not used Set off off
DS-6 not used Set off off
DS-5 AES Set as desired
DS-4 Inverter voltage Set as desired
DS-3 Inverter frequency Set as desired
DS-2 Stand-alone operation off
DS-1 Stand-alone operation off
Examples of DIP switch settings for stand-alone mode are given below.
Example 1 shows the factory setting (since factory settings are entered by computer,
all DIP switches of a new product are set to ‘off’).
Four examples of stand-alone settings:
DS-8 not used off
DS-7 not used off
DS-6 not used off
DS-5 AES off
DS-4 Inverter voltage on
DS-3 Inverter frequency on
DS-2 Stand-alone mode off
DS-1 Stand-alone mode off
DS-8 off
DS-7 off
DS-6 off
DS-5 off
DS-4 off
DS-3 off
DS-2 off
DS-1 off
DS-8 off
DS-7 off
DS-6 off
DS-5 off
DS-4 on
DS-3 off
DS-2 off
DS-1 off
DS-8 off
DS-7 off
DS-6 off
DS-5 on
DS-4 off
DS-3 on
DS-2 off
DS-1 off
stand-alone
Example 1 (factory setting):
5 AES: off
4 Inverter voltage 230V
3 Inverter frequency 50Hz
2, 1 Stand-alone mode
stand-alone
Example 2:
5 AES: off
4 240V
3 60Hz
2,1 Stand-alone
stand-alone
Example 3:
5 AES: off
4 230V
3 60Hz
2,1 Stand-alone
stand-alone
Example 4:
5 AES: on
4 240V
3 50Hz
2,1 Stand-alone
To store the settings after the required values have been set: press the 'Up' button for
2 seconds (
upper button to the right of the DIP switches, see appendix A, position J).
The overload and low-battery LEDs will flash to indicate acceptance of the
settings.
You can leave the DIP switches in the selected positions, so that the settings can
always be recovered.