Victron energy Peak Power Pack, Руководство пользователя

Страница: 13 / 52

9
E
N
N
L
D
E
9. FAILURE REPORT INDICATIONS
In case of a failure, both LED’s blink a number of times followed by one second pause.
This number indicates which failure has occurred.
Number of times the
LED’s blink followed by
a short rest Failure description Remedy
1 Deep discharge Charge *)
2 The battery temperature is too
high Cool down
3 The battery temperature is too
low for charging. (below 0
°
C)
Move to a room with
temperature above 0
°
C
4 The temperature of the
electronics is too high Cool down
5 Ouput current too high
(overload)
6 Short circuit Check cables / wiring
7 Short circuit Check cables / wiring
8 Input voltage too high Check cables / wiring
9 Charge from output terminals Check cables / wiring
10..18 Other problem Consult your
supplier/dealer
If the problem has been solved, the failure indication can be cleared by pushing the push
button.
*) If the Peak Power Pack is used for a caravan mover, it is important that the mover is not
turned more tighten to the wheels than required. Otherwise the power consumption can be
double and the driving time halved. Also the tubes of the caravan must not be soft and the
weight at the front wheel must not be much, to avoid excessive power consumption.
10. CLEANING AND MAINTENANCE
The Peak Power Pack can be cleaned with a damp cloth. Do not use aggressive cleaning
agents.
The Peak Power Pack is maintenance-free.