Victron energy Peak Power Pack, Руководство пользователя

Страница: 12 / 52

8
7. TAKING THE PEAK POWER PACK INTO OPERATION
If an input voltage is present at the “DC in” (power adapter or fastons input), the Peak
Power Pack will automatically start charging. If the input voltage is interrupted (or a failure
occurs), charging will be stopped automatically.
The output voltage can be switched on by the push button.
The push button beside the LEDs has two functions:
•
Switch the output voltage on/off. (If the output voltage is switched off during charge
process, the charge process will continue.)
•
Clear a failure, that is being indicated by blinking LEDs.
(The external push button has the same function as the internal push button near the
LEDs.)
If there is no input voltage and the output current is lower than 1A for 15 minutes, the Peak
Power Pack will automatically switch off the output voltage.
(Switch off by the push button is also possible of course.)
8. INDICATIONS
The orange LED indicates if the Peak Power Pack is being charged.
The green LED indicates if the output is switched on.
Orange LED Green LED
Peak Power Pack off Ouput off
Peak Power Pack being
discharged. Ouput on.
Peak Power Pack being charged. Ouput on.
Peak Power Pack being charged. Ouput off.
Peak Power Pack fully charged. Ouput on.
Peak Power Pack fully charged. Ouput off.
Failure Ouput off.
= Off
= On
= Slow blinking (2 seconds on, 2 seconds off)
= Fast blinking (½ second on, ½ second off)