Victron energy Peak Power Pack, Руководство пользователя

Страница: 10 / 52

6
6. CONNECTING CONDITIONS
Output to the load (caravan mover etc.)
Power adapter
Input (car, solar panel etc.)
External start push button
6.1 Connection of the output
At the output terminals ( 1+ and 1- ) the plus and minus cables to the load (f.e. caravan
mover) can be mounted with M6 screws. (Pay attention to the polarity.) Pay attention, that
these cables must be as short as possible (to prevent voltage loss) and thick enough to
(shortly) conduct a 200A current.
If a low power load (such as lights) is connected to the output terminals as well, a fuse with
low current rating (f.e. 10A) must be mounted in the po) wire. If you don’t do this and
a short circuit occurs, the Peak Power Pack will not switch off and the wires can blow and/or
fire can be caused.