manualshive.com logo in svg

Victron energy LiFePO4 Battery 12,8V/60Ah Smart, Руководство пользователя

Поделиться
Скачать
Victron energy LiFePO4 Battery 12,8V/60Ah Smart Скачать руководство пользователя страница 26

6. Operation

Once in operation, it is important to take proper care of the battery to maximise its lifetime.

These are the basic guidelines:

• Prevent total battery discharge at all times.

• Familiarize yourself with the pre-alarm feature and act when pre-alarm is active to prevent a DC system shutdown.

• If the pre-alarm is active, or if the BMS has disabled the loads, make sure that the batteries are recharged as soon as possible.

Minimise the time the batteries spend in a far discharged state as much as possible.

• The batteries need to spend at least 2 hours in absorption charge mode each month to ensure sufficient time in balancing

mode.

• When leaving the system unattended for some time, make sure to either keep the batteries charged during that time, or make

sure the batteries are almost) full and then disconnect the DC system from the battery.

6.1. Monitoring

VictronConnect App can be used to monitor the battery via Bluetooth.

VictronConnect will show the voltage of each cell, the battery temperature and if there are active voltage and/or temperature
alarms. Alarm messages can only be seen or received when VictronConnect is actively connected to the battery and the phone is
actively showing the Smart lithium screen. The app is not active in the background or when the screen is off.

VictronConnect

This manual describes the Lithium Smart related functionality of VictronConnect. For more general information, we recommend to
read the 

VictronConnect manual

.

6.2. Warnings and alarms

These are the possible warnings and alarms that can be generated by the battery:

Cell under voltage warning

The voltage of one or more cells is becoming too low and discharging has been disabled. To remedy this warning, recharge the
battery as soon as possible.

Under voltage alarm

Lithium Battery Manual

Page 23

Operation

Содержание LiFePO4 Battery 12,8V/60Ah Smart









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды