Victron energy LiFePO4 Battery 12,8V/60Ah Smart, Руководство пользователя

Страница: 17 / 40

• Go to product info.
• Check if you are running the latest firmware and look for the text: “This is the latest version”.
• If the battery does not have the most up to date firmware, perform a firmware update.
Firmware
information
Go to settings Go to option menu
Main battery screen Setting screen Product info screen
4.4. Charge batteries before use
When installing a single battery or multiple batteries in parallel, the procedure outlined in this chapter is not
required.
If multiple batteries are going to be connected in series or in series/parallel, each individual battery needs to be charged before all
batteries are interconnected.
Background: batteries are approximately 50% charged when shipped from the factory. This is because of transportation safety
requirements. Due to differences in transportation routes and warehousing the batteries do not all have the same state of charge
by the time they are installed.
And as the system is only able to correct small differences in state of charge from one battery to another, a large imbalance with
newly installed batteries will not be corrected. Note that this type of imbalance, different state of charge between batteries, is
different from imbalance of cells within a battery.
4.4.1. Initial charge settings
Same as for when an already installed battery a BMS must be used.
Charger or inverter/charger settings for initial charge with a BMS (same settings as for normal operation):
Recommended charger settings
Battery model Max. charge
current
Charge profile Absorption voltage Absorption time Float voltage
12.8 V - 60 Ah 30 A Lithium, fixed 14.2 V 2h 13.5 V
12.8 V - 100 Ah 50 A Lithium, fixed 14.2 V 2h 13.5 V
12.8 V - 160 Ah 80 A Lithium, fixed 14.2 V 2h 13.5 V
Lithium Battery Manual
Page 14 Installation