12.4. General start/stop - Main Page
From the Main Menu select Settings > Generator start/stop:
•
Generator state:
Current status of the generator.
•
Error:
Error description.
•
Runtime:
Generator run-time since last start.
•
Total run time:
Accumulated running time since the first start.
•
Time to next test run:
When the 'test run' option is enabled this item shows the time remaining until the next test run.
•
Daily runtime:
Running time history for the last 30 days.
•
Settings:
This is the gateway to all other features.
12.5. Settings
Conditions: See
Minimum run time:
It's good practice for a generator, once started, to be allowed to reach its operating temperature. When
started manually this setting is ignored.
Detect generator at AC input:
Enabling this feature will raise an alarm on the GX device, as well as trigger an alarm email from
the VRM portal(1), whenever power is not detected at the AC input terminal of the Inverter/Charger. This function will bring
attention to a wide variety of problems; such as lack of fuel, or a mechanical or electrical fault at the generator. This functionality is
not available for VE.Can connected Multi/Quattro. (1) requires automatic alarm monitoring on VRM to be enabled. Which it is by
default.
Quiet hours:
Reset daily run time counters:
Resets the 30 day run-time history.
Generator total run time:
Reset, or modify, the total run-time hours.
12.6. Conditions: User-definable parameters which trigger a generator auto-
start.
To get to Conditions from the main menu go to: Settings → Generator start and stop → Settings → Conditions
Color Control GX Manual
Page 58
GX - Generator auto start/stop
