Victron energy 24/30, Руководство пользователя

Страница: 16 / 30

16 Manual Skylla with universal input
4. OPTIONS
The Skylla charger is factory set to standard values. Some of these standard values can
be changed by a qualified electrical technician into customised values. This chapter
describes which values can be changed and how to change them.
Opening of the battery charger cabinet
In order to change the standard values the front of the charger has to be removed.
Disconnect the mains from the charger and wait two minutes.
Unscrew the 4 screws on the front of the cabinet, see illustration 6.
Remove the front panel of the battery charger.
Adjustments can be made by means of turning a potentiometer or by changing the
position of a switch on the DIP-switch.
See illustration 7 for the location of the DIP-switch and the potentiometers.
Illustration 6.
Removing the front.
Attention ! The value of the potentiometers I, Vboost and Vfloat
may only be adjusted by a qualified electrician. The remaining
potentiometers may not be adjusted at any case.
Illustration 7.
Location of the DIP-switch and potentiometers.
DIP switch
I
Vboost
Vfloat
The cover of the Skylla may only be removed by a qualified
technician.
Before obtaining access to the Skylla the mains supply
circuit must be disconnected.
There is a dangerous voltage present on some of the metal parts
inside the battery charger.