![Victrola E-69EB Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/victrola/e-69eb/e-69eb_manual_1014595011.webp)
11
2. While the BT is activated, turn on the BT setting on your external device.
3. Your external device will begin to search for the Wooden Music Center.
NOTE:
The effective distance between your external device and this apparatus is 10 meters (33ft).
4. Wait for “
Wooden Music Center
” to appear on the paired devices list on your external device and
press “
Wooden Music Center
”.
In some instances, you will be asked for a password. Fill in “0000” then press “OK” on your
external device.
5. A few seconds later when your Bluetooth connection is successful, the blue indicator will stay lit.
You can control music playback with the PLAY/PAUSE
( )
or the (
and
) buttons on the
apparatus.
Note: Stop / Fast Forward / Rewind are only available on your external device.
Listening to a Cassette Tape
1. Press the TAPE button.
2. Load an audio cassette tape into the unit (located on the right side of the unit). Playback will
automatically begin.
3. Press button halfway to Fast Forward the tape.
Press button lightly and playback will resume.
4. Press button completely down to end playback and eject tape.
Maintenance / Proper Handling
Compact Disc Handling
•
Always place the disc on the disc tray with the label side facing upward (compact discs can be
played/recorded only on one side).
•
To remove a disc from its storage case, press down on the center of the case and lift the disc
upward, holding it carefully by its edges.
•
To clean a disc, wipe the surface from the center hole outward towards the outer edge with a soft,
dry cloth.
•
Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to clean
discs; they will irreparably damage the disc’s plastic surface.
•
Discs should be returned to their cases after use to protect from dust and scratches.
•
Do not expose discs to direct sunlight, high humidity, or high temperature for extended periods of
time.
•
Printable CD-R and CD-RW discs are not recommended, as the label side may become sticky and
damage the unit.
•
Use a soft oil-based felt-tipped pen to write information on the label side. Never use a ball-point or
hard-tipped pen, as doing so may damage the recorded side.
•
Do not use irregularly shaped CDs (octagonal, heart shaped, business card size, etc), as they will
damage the unit.
•
Read all precautions supplied with any CD-R or CD-RW disc.
•
Never handle a disc with dirty fingers.
•
Never insert a disc that has a crack on the surface.
Handling Vinyl Records
•
Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands.
Touching the record surface will cause your record’s quality to deteriorate.
•
To clean a record, use a soft anti-static cloth to gently wipe the record surface.
•
Keep records in their protective sleeves when not in use.
•
Always store records upright on their edges.
•
Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.), or in a
location subject to vibration, excessive dust, heat, cold or moisture.
General Care
•
When removing the power plug from the wall outlet, always pull directly on the plug.
Never pull the cord.