BEFORE INSTALLING THE RANGE HOOD, CHECK FOR PHYSICAL DAMAGES.
THIS RANGE HOODS COMES WITH A WIRE AND PLUG.
TEST THE HOOD BEFORE INSTALLATION.
If there is a grinding noise coming from the motor,
DO NOT INSTALL IT
, contact us as soon as possible.
Advanced Preparations:
1.
Read the entire installation guide and users manual thoroughly, understand instructions and warnings.
2. Be familiar with the controls of the range hood.
3.
Place the range hood on a flat, stable surface. Connect the range hood to a designated standard outlet
(please refer the product label for the suitable voltage of this unit) and verify no debris has entered the
duct openings, then turn on the range hood.
4.
Place all supplied parts and required hardware on a flat, stable surface and verify the existence of all
supplied parts.
5.
Carefully remove the white/blue plastic protective coat from the chimney covers and range hood if any.
Preparations:
NOTE: To avoid damage to your hood, preduct debris from entering the duct opening.
1. Determine and mark the center line on the ceiling where the range hood will be installed. Make sure
there is proper clearance within the ceiling or wall for exhaust duct.
2.
Due to the weight and size of this unit, please make sure that the support system or framework being
used is stable and secure in the ceiling.
3.
Put a thick, protective covering over counter top, cook top or range to protect from damage or dirt. Re-
move any hazardous objects around the area when installing.
4.
Mark the locations of the support mounting bracket holes, vent cutout (if used) and power supply cable
cutout on the ceiling. Use drill and saber saw or keyhole saw to cut openings for power supply cable and
duct.
5. Use caulking to seal exterior wall or roof openings.
6. Disconnect main electrical supply, prepare and run electrical wiring through ceiling. Leave approximately
12” of electrical cord hanging from the ceiling. Do not restore power until wiring is completed.
7. Disconnect power cord, remove the stainless steel baffle filter and grease tunnel.
8.
Set aside the stainless steel baffle filters and grease tunnel until the range hood is properly installed.
VICTORY range hoods
| PLANE ISLAND
14
VICTORY range hoods
PLANE ISLAND | 15
PREPARATION
Содержание PLANE-ISLAND
Страница 12: ...13 2 23 A 26 to 40 11 12 Model A 29 30 35 36 41 42 VICTORY range hoods PLANE ISLAND 12 DIMENSIONS Continued ...
Страница 14: ...21 2 27 47 26 to 40 13 12 Model 48 VICTORY range hoods PLANE ISLAND 14 DIMENSIONS Continued ...
Страница 34: ...583 Nicola Avenue Port Coquitlam BC Canada V3B 0M3 www kitchenhoods ca ...