Victory EMHD Series, Руководство оператора

Страница: 30 / 57

Operator’s Manual Victory EMHD Series
- Page 30 of 57 - Version 2.0
5.7 PTO Shaft Instructions
1.
Park the tractor on a level surface. Slowly adjust the tractor’s three -point hitch until the
tractor’s output shaft is level with the implement’s input shaft.
2.
Place the gear selector in the park mode, set the parking brake, shut the tractor off, and
remove the switch key.
3.
Block the implement to prevent it from going downward.
4.
Slide the PTO shaft's inner yoke (implement end) onto the input shaft.
Secure the PTO shaft with the yoke locking device.
5.
Slide the PTO shaft's outer yoke (tractor end) over the tractor output shaft.
Secure the PTO shaft with the yoke locking device.
6.
If the PTO shaft does not fit between the tractor and implement, skip to the instructions to
‘Shorten Driveline Length.’
7.
Move the PTO shaft back and forth to ensure that both ends are secured (to the tractor and
the implement).
8.
Your PTO shaft comes with a chain on the shield. Secure the chain to the tractor and the
implement. This will prevent the protection from spinning during operation.