Victory EMHD Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 57

background image

Operator’s Manual Victory EMHD Series

- Page 18 of 57 -

Version 2.0

Guarding

To not effectively eliminated hazards, provide guarding whenever feasible.

The PTO master shield, integral driveline shield, and input connection

shield should offer an interactive guarding system.

◼

Provide instructions by labels or manuals. Use t

he implement only with the tractor’s PTO

master shield.

◼

Specify and test an integral driveline shield with end cones that overlap but do not interfere
with the PTO master shield or implement an input connection shield.

◼

Provide an input connection shield to interact with the integral driveline shield to guard the
shaft coupling and any torque limiting devices installed on the driveline.

◼

Check that all routine maintenance of the driveline can be done without removing the shields.

Warnings and Instructions

Provide warnings and instructions for hazards associated with the machine. Provide instructions
for proper maintenance and repair.

◼

Provide labels on the unit to advise the user of proper hitch dimensions and maximum safe
operating speed.

◼

Check that proper danger labels are supplied with the driveline concerning these parameters

may be found in all driveline manufacturer’s

catalogs.

◼

Provide easy-to-understand instructions for proper driveline operation, maintenance, and
repair in the operat

or’s manual.

◼

Advise against the use of PTO adapters which may defeat the purpose of the tractor’s master

shield and adversely affect the performance of the driveline.

◼

Advise the user of locations of genuine original equipment spare parts.

You can obtain further information about driveline specifications and safety from your driveline
supplier and the following ASME standards and engineering practices:

◼

S203

Rear power take-off for agricultural tractors.

◼

S205

Power take-off definitions and terminology of farming tractors.

◼

S207

Operating requirements for tractors and power take-off driven equipment implements.

◼

S318

Safety for agricultural equipment.

◼

S331

Implement power take-off driveline specifications.

◼

S333

Agricultural tractor auxiliary power take-off drives.

◼

S350

Safety alert symbol for agricultural equipment.

◼

S441

Safety signs.

◼

S493

Guarding for agricultural equipment.

◼

EP363

Technical publications for agricultural equipment.

Other standards may apply to particular types of implements. All driveline manufacturers strive to
produce a safe product.

Like most other components, drivelines must be appropriately used, including proper tractor
master shields and implement input connection shields. Please contact us if you have any
questions about your driveline applications.

«
...
16
17
18
19
20
...
»

Содержание EMHD Series


























































Отзывы:

Нет отзывов

Похожие инструкции для EMHD Series

Бренд: B&K Страницы: 5

Бренд: B&K Страницы: 28

Бренд: ParaBody Страницы: 4

Бренд: OMCA Страницы: 36

Бренд: Salford Страницы: 64

Бренд: Rapid Technic Страницы: 152

Бренд: Bard Страницы: 144

Бренд: GALBIATI Страницы: 8

Бренд: Vahva Jussi Страницы: 9

Бренд: Datalogic Страницы: 20

Бренд: Datalogic Страницы: 188

Бренд: Pablo Страницы: 7

Бренд: Xiitech Страницы: 6

Бренд: Landoll Страницы: 70

Бренд: Landice Страницы: 19

Бренд: Landice Страницы: 7

Бренд: Mangar International Страницы: 8

Бренд: Malvern Instruments Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды