Victory Motorcycles Vision Tour 2013, Руководство пользователя

Страница: 68 / 134

66
Maintenance
Rear Suspension Adjustment
For riding comfort and to ensure proper ground clearance,
adjust rear shock air pressure as specified on the label
located in left saddlebag area (see below).
Follow these guidelines when adjusting:
• Park the motorcycle with the sidestand down on a firm,
level surface. Remove all riders and cargo.
• DO NOT exceed 72 PSI (496 kPa) in the shock.
• Use the VICTORY Air Pump & Gauge (PV-48909).
Follow the instructions on the following pages.
If the VICTORY air pump and gauge are not available, use
the gauge provided in the tool kit, and a pressurized air source with a maximum line pressure
of 72 PSI (496 kPa). After using this gauge, remove it quickly to minimize leakage. Expect
to lose about 4 PSI (27.6 kPa) with each pressure check when using this gauge.
Use only a
dry air source , such as a system with a water separator or air line dryer, to prevent moisture
from entering the shock.
CAUTION! Air pressure increases VERY quickly when using pressurized air. Wear eye and face
protection .
Air Suspension
Adjustment
(Shock Label 7176130)
NESS MODELS
Air Suspension
Adjustment
(Shock Label 7174258)
TOUR MODELS
Set desired pressure with bike
unloaded on side stand
Set desired pressure with bike
unloaded on side stand
LOW
SUSPENSION
No
Trunk
Trunk
Total Cargo &
Occupant
Weight (lbs)
Air Pressure
(psi)
Total Cargo &
Occupant
Weight (lbs)
Air Pressure
(psi)
100 22 100 0 0
125 25 125 0 6
150 28 150 0 10
175 31 175 4 13
200 33 200 10 19
225 36 225 14 23
250 39 250 19 28
275 42 275 24 33
300 46 300 30 39
325 50 325 35 44
350 55 350 40 49
375 60 375 46 55
400 66 400 51 60
425 72 425 57 66
MAX PRESSURE 72 PSI 450 62 71
MAX PRESSURE 72 PSI
Shock Label