Victory Motorcycles Vision Tour 2013, Руководство пользователя

Страница: 113 / 134

111
Audio System Overview
Citizens Band (CB) Radio
Controls
If equipped, the operator’s CB radio con-
trols are located on the left handlebar above
the audio controls. Operation of these con-
trols is outlined in greater detail on the fol-
lowing pages.
1.
Push-to-Talk (PTT):
Press and hold
the top or bottom of the button to trans-
mit. See page 119.
2.
Squelch
: Press SQ (+) or SQ (-) to
adjust CB radio channel reception sen-
sitivity. See page 119.
3.
COM
: Press COM to turn the CB radio
on or off. Press and hold COM to select
a COM channel.
4.
ICOM
: Press ICOM to turn the driver/
passenger intercom on or off. Press and
hold ICOM to access Voice-Activated
Switch (VOX) settings. See page 120.
Passenger CB Controls
1.
Push-to-Talk
(PTT):
Press and
hold the button to
transmit.
2.
Rear Volume
: Press
(+) or (-) on the pas-
senger control to
raise or lower volume.
Audio System Power
The ignition key must be in the ACC or ON
position to use the audio system.
With the key in the ACC or ON position and
audio system OFF, the screen will display
“VICTORY”.
Tip: To prevent battery drain, do not leave the
key in the ACC position for long periods.
VICTORY recommends using the audio sys-
tem only when the engine is running.
Press the power button
to turn the audio sys-
tem on. The screen will
display the active
sources.
1. Current audio source:
• (U.S.) FM / AM / WX / iPod - AUX / XM
• (Euro) FM / MW / LW / iPod - AUX
2. Station preset number (P1-P12)
3. CB radio active channel (if equipped)
4. Intercom system active (if equipped)
5. Stereo indicator
Tip: The audio system will always display the last
active source when turned on.
1 3 2
4
VICTORY
1
2
3
5
4
FM
ICOM
CB19
P1 ST
97.1