Victory Motorcycles Vision Tour 2013, Руководство пользователя

Страница: 123 / 134

121
CB Radio / ICOM System
ICOM System
VOX Break Setting
Push COM or ICOM or (+) or (-) on the
console panel to adjust the sensitivity set-
ting.
Tip: Lower settings require less volume to open
the intercom. If wind or ambient vehicle
noise trigger the VOX to open, set the VOX
sensitivity to a higher level.
Press S/E on the left
control to exit the
screen and return to
the main display.
“VOX” will display
on the console
screen whenever the driver or passenger are
communicating over the intercom system.
Driver ICOM Volume
To change
settings, enter the
mode menu. Press
(+) or (-) on the
console panel to adjust settings. Press S/E to
save and exit.
Tip: Intercom volume can also be adjusted with
the hand control when the VOX circuit is
open.
Passenger ICOM Volume
The passenger can control rear
speaker volume only when the
CB radio, ICOM or rear head-
set speakers are active.
Press (+) or (-) on the passen-
ger control to raise or lower
volume.
Headset Receptacles
The driver’s headset receptacle is located on the console. The passenger’s receptacle (if
equipped) is located near the passenger’s audio controls.
COM
+/-
ICOM
VOX 15
100.5
FM
VOX
CB19
ICOM VOL 15
+
-
Driver
Headset
Receptacle
12-Volt
Receptacle
Passenger
Headset
Receptacle