Victory Fire & Gas WM2.5GAL, Руководство по эксплуатации для владельца

Страница: 4 / 15

4
HOW TO USE
WARNING
Persons expected to use this fire extinguisher should be trained in initiating its operation and in the
proper firefighting technique. Familiarize all personnel with this information before an emergency
occurs.
Failure to start back at a sufficient distance from front edge of the fire or use an inadequate sweeping
technique of the agent stream could splash and / or scatter burning materials
1. Remove the extinguisher from its hanger or bracket.
2. Pull and remove the ring (safety) pin, breaking the visual tamper seal.
3. Using the extinguisher carrying handle, transport the unit to a safe position upwind of the fire.
4. Remove the nozzle from the retainer and while keeping the extinguisher in a vertical position,
aim the nozzle at the base of the fire.
5. Approach fire from upwind, minimum of 10 feet of the front edge of the fire.
6. Starting back from this distance, squeeze the operating lever fully to initiate the agent
discharge.
7. Apply the water mist discharge in a gentle sweeping manner, being careful not to scatter the
fuel. Operators can advance closer as control of the fire is gained; however, they should avoid
stepping into the fuel or fire area.
8. When the fire is out, standby if practical, until the burning media has cooled to ensure
extinguishment.
9. Evacuate and ventilate the area immediately after extinguishing the fire. The fumes and
smoke from any fire may be hazardous and can be deadly.
10. Ensure the burning media is properly removed and disposed of in accordance with any local
handling requirement
REMEMBER STEPS.
P.A.S.S
.
P
ULL
A
IM
S
QUEEZE
S
WEEP