Victoria VITTORIA 8, Инструкция по эксплуатации

Страница: 13 / 24

03.2021 INSTRUCTION MANUAL for installation and operation of pellet stove VITTORIA 8
13
10.2.4. Installer settings.
Types of settings for Installer (entered with installer password)
Factory settings
Duration 600 sec. (300 ÷ 990)
Initial filling 90 sec. (10 ÷ 99)
Fan 1500 rpm
Screw feeding 2,5 sec. (0,1 ÷ 15)
Screw Cycle 30 sec. (1 ÷ 100)
Temperature/ON 60
0
C
Temperature/OFF 90
0
C
Repetitions 2
Second filling 30 sec. (10 ÷ 250)
Duration 180 sec. (100 ÷ 600)
Fan 1600 rpm
Screw feeding 3 sec. (0,1 ÷ 15)
Screw Cycle 15 sec. (1 ÷ 100)
Temperature
difference/deg.
0 1 2 3 4
Fan / rpm 1100 1200 1300 1400 1500
Second Fan/% 50 60 70 80 90
Screw feeding/sec. 1,2 1,6 1,5 1,5 1,5
Screw cycle/sec. 7 7 6 5 4
In this menu a selection can do among four display
languages: Bulgarian, English, Dutch, and German.
10.2.5. Service technician settings.
Types of settings for service technician (entered with
service technician password)
Parameter Factory settings
Switch-on Temperature
Here one can set the Smoke gases, which the
air fan on at.
110
0
C
Hysteresis
This is the thermal lag at which the room fan
will stop operating. I.e. if it has been set to
switch on at 110
°С , it will stop at 90 °С , if the
hysteresis is 20 °С.
It can be set within the range of 1 °С to 50 °С.
20
0
C
Initial Purge
In Initial Purge the duration of the operation of
the smoke fan can be set to 100% in seconds in
the
Start Mode .
60 sec. (30 ÷ 250)
Extinct Fire
In extinct fire one can set the duration for the
smoke fan to operate at 100 % in Clean Mode.
This mode gets active if the control unit
transfers to switch-off and extinction of the
fireplace!
300 sec.
(100 ÷ 2000)