www.victorruoshui.co.kr
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부
또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
- 26 -
100μF
±(5.0%+8)
100nF
1000μF
±(5.0%+8)
1
μ
F
Overload Protection: 250V DC or AC Peak
Value.
2-2-8. Frequency (F)
1. Connect test leads and shielded cable to
“
COM
”、
“
”
terminals.
2. Rotate function switch to “Hz” gear.
Connect test leads and the cable to the
signal source or the tested load. The tested
signal will show on the screen.
Caution
:
1. When inputting AC RMS over 10V, it
could show reading, but excess vibration
may appear;
2. It is recommended to test weak signals by
shielded cable under noisy circumstances.
3. Press “Hz/DUTY” button to choose the
